-
- EN
Inductive ring sensor IRB
IRB 27 PS-B3
Article Number: 210915
The inductive ring sensors in the IRB Standard series in the sizes Ø 10.1 mm to 27 mm detect the smallest metallic parts. They can be put into service quickly and have no adjusting elements. These sensors work according to the static operating principle and exhibit a short response time.
- Quick commissioning, no setting elements
- No risk of incorrect adjustments
- High protection type IP 67
- Short response time
- Resistant to dirt
- Static operating principle
- Metal connector
Your price: Login
Service voltage
10 … 35 V DC (Supply Class 2)
No-load current (max.)
11 mA
Insulation voltage endurance
1000 V
Internal diameter
27.1 mm
Housing material
Plastic (PA)
Material
POM (Ring)
Protection class
III, operation on protective low voltage
Approvals
UL
Operating principle
inductive
Evaluation
Static
Switching output
pnp, 200 mA, NO
Voltage drop (max.)
2 V
Pulse stretching
150 ms
Resolution
Ø 5.0 mm
Sensitivity adjustment
no setting elements
Speed of parts (max.)
35 m/s
Readiness delay (max.)
300 ms
Shock/vibration load
30 g, 11 ms / 10 … 55 Hz, 1.0 mm
Ambient temperature during operation
-25 … +70 °C
Protection type
IP 67
Connection
Connector, M12, 4-pin, A-coded
Connection cable
VK …
Product
Connection
Design
Line length (mm)
Wire cross-section (mm²)
Protection type
The search found 7 hits
Title
Category
Filetype (size)
Select
Title:
210915_bpz_IRB_27_PS-B3
Category:
Installation Guides
Filetype (size):
PDF
(501.72 KB)
Select:
Title:
EU-DoC 1012-02
Category:
Certificates - Declarations
Filetype (size):
PDF
(303.77 KB)
Select:
Category:
Certificates - Declarations
Filetype (size):
PDF
(341.07 KB)
Select:
Title:
UK-DoC 2012-02
Category:
Certificates - Declarations
Filetype (size):
PDF
(266.78 KB)
Select: